FUELPro is an aftermarket performance fuel pump controller designed for vehicles such as Subaru, Nissan and Mitsubishi. It is designed with performance fuel pumps in mind so it can draw currents of up to 22.5 Amps steady and 25 Amps peak. Here are some facts:

1- FUELPro prevents fuel warm up and cavitation due to fuel pump bypass and continuous operation at 100%.

2- FUELPro continuously adjusts the power to the fuel pump based on the demand from the ECU or sensor.

3- FUELPro delivers higher pump power ahead of engine's increase in demand as it senses the ramp up of demand and adjusts with accuracy to increase performance.

4- FUELPro increases the life of the fuel pump compared to always on pump.

FUELPro is very simple to install. Just connect the switched power in to the controller and pump power out and one wire command coming from ECU. You are all set!

Note:Default setting for demand signal is a 5V PWM signal.If you have a 5V/12V analog signal from your ECU, TPS or mass airflow sensor please pick the 5V analog option (no extra charge). For 12V please add a note or send us an email.

Please Choose:

0-5 volts analog input

Your IP Address is:
Copyright © 2015 DCCDPro Webstore. Powered by Zen Cart